SYMPHONY V110 Flash File_V6.0_HW1_V11 Dead Boot Repaire File 1000% Ok Tested
SYMPHONY V110 Flash File
V110 Flash File
SYMPHONY V110 Firmware
V110 Firmware
Monkey Virus Problem,Pattern Lock Problem,Privacy Lock Problem Solution,
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Update
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Update
SYMPHONY V110 Official Firmware 100% Tested Flash File Download Link
SYMPHONY V110 Flash file
SYMPHONY V110 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
SYMPHONY V110 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
SYMPHONY V110_V6.0_HW1_V11
Install ROM:
Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Cm2 / Others Tools
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
SPD Install ROM:
___________________________
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
