SMILE Z1 HB LCD Problem Fixed Frimware Flash File 100% ok

SMILE Z1 HB LCD Problem Fixed Frimware Flash File 100% ok 

SMILE Z1 (HB)

 NO DEAD RISK
NO LCD PROBLEM
 SMILE Z1 HB LCD Problem Fixed Frimware
 Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand     : SMILE
ProdName  : Z1
ProdModel : Z1
Device    : SMILE
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2
[Read Ok] : preloader_yuanda6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1330 MiB
Scatter saved to : C:\Users\Desktop Jamuna Telecom
\MT6580__SMILE__Z1__SMILE__5.1__ALPS.L1.
MP6.V2_YUANDA6580.WEG.L_P2\
All done!
SMILE Z1 (HB) MTK6580 FLASH FILE

( Logo Hang Problem Solved File) 

Install ROM:
Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Aladdin / cm2 / Others Tools
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.